Four Gas Analyser

• ARAI Approved
• High Quality SMPS operated from 90volts to 270volts
• Very low electric consumption, can work on UPS also
• Heat resistant silicon tubes
• Extra ordinary dust filter – 7 Microns
• High quality water separator
• 32bit Micro – Processor
• Electromagnetic field resistant
• On board Atmospheric pressure sensor
• Voltage drops, spike, bursts resistant
• High quality display
• 2way RS-232 serial port (synchronous)

Technical Features :

• Measure Range (Resolution)
  • CO: 0~9.000% (0.001%)
  • CO2 : 0~20.00% (0.01%)
  • HC : 0~10,000ppm (1ppm)
  • O2 : 0~25.00% (0.01%)
  • Lambda : 0.050~3.00(0.01)
  • AFR: 7.35~29.40(0.01)
• Warm up time : less than equal to 3min
• Auto Zero : 20sec
• Fuel selectable (Petrol / LPG / CNG)
• Leakage Test
• HC Residual Test
• RS-232 communication
• Measured items – HC, CO, CO2, O2 Lambda/AFR (Optional : RPM/Nox)
• Power Supply-270 (W) x 370 (D) x 170 (H) mm
• Weight – 5kg
• Basic Accessories : Probe, 5M Hose, Fuse, Leak Test Cap, Dust Filter, Carbon Filter, Software CD, Power Cord

Optionals :

• In built Thermal Paper Printer
• RPM-Inductive Type (Upgradeable)
• RPM-Battery Tacho Meter (Upgradeable)
• Nox (Upgradeable)
• Optional DC 12 Volt Inverter (mainly useful in Mobile Testing PUC Centers)

The Diesel Smoke Meter Model SM-054 is a high quality microprocessor based instrument that combines optical precision with a robust designtogive long and trouble free service.

The equipment can be easily mounted on a free moving trolley for easy mobility. It also has the option of adding Non Thermal Paper Printer for printing a record of the test results. One of the most outstanding feature of this equipment is its ability to operate on 220V AC or a 12DC vehicle battery.

All the above features combined with a simple and comprehensive. easy to use operate front panel makes this as one of the best Diesel Smoke Meter available in India. This equipment meets all the requirements and norms as specified by Central Motor Vehicles Act and is approved by ARAI, Pune.

This equipment is suitable for use at Service Stations. Automobile Workshops, Pollution Checking Centers and Mobile Vans.

• Smoke Sampling : Partial Flow
• Zeroing : Automatic
• Temperature : Gas Chamber Temperature Display
• Measurement Range % : 0-100% with 1% resolution
• Measurement : 0-9.99 (0.00) with 0.01 resolution
• Range K RPM : 300 to 9999 with ±10 resolution
• Data Output : Printer/RS 232 (Serial Port)
• Power Required : 220V, Single Phase/12 VDC
• Standard Accessories : Exhaust Pipe, Piezo Sensor, RS232 Cable, Electric Cable, Battery Cable, Measuring Probe (1no.) Calibration Slide with 50% Opacity
• Optional Accessories : Trolley, Printer, Battery/Magnetic RPM Sensor, Remote

• Elegant and Smart Features.
• Indiginsled Compact Product.
• State of the Art Technology
• State of the Art Technology
• Standby for low power consumption when not in use.
• 8 Bit – Microprocessor Control.
• Graphite LCD Display for Day & Night Visibility
• Measures Switches for long durability.
• AC/DC Operational
• Warranty 12 Months from the Date of Supply.
• Approved by ARAI, Pune

• Measuring range Opacity : 0....99.99 opacity in %
• Accuracy & Repeatability : 1% of full scale
• Resolution : 0.01%
• Absorption0...9.99% absorption m+
• Accuracy & Repeatability : Better than 0.10m+
• Resolution : ±0.01m
• Measurement Chamber : Effective length 0.430m ±0.005m
• Heating Time : Approx 10min (220V)
• Light Source : Halogen Lamp
• Detector : OPT 101
• Measurement Value Indication : Micro-Processor controlled, LCD display, 20 Char x 4 Lines
• Low Battery Temperature : The display will indicate low battery below 11V
• Oil Temperature Range : 0...150°C
• Resolution : ±1°C
• RPM Range Piezoelectric : 0...6000rpm
• Resolution (Optional) : 1rpm
• RPM Range Tachometer (CRDI) : 400-999rpm
• Resolution : 1rpm
• Hand Held Operating Unit (Remote) : 5m cable connection LCD displays Opacity, Absorption, RPM, Oil Temp & Function keys for performing the normal tests
• Display : LCD

Laser wheel alignment is not only one of the most precise wheel alignment system available, but also one of the fastest. It's the most simple and accurate system using a perfect beam of Laser Light & a series of optically accurate concentric mirrors to make precise measurement of wheel runout, castor, & toe. The easy to use system requires almost zero maintenance.

It is available in 8 different models customized to suit the requirement of each & every automobile vehicle available on road. It is the most economical equipment which can handle all passenger Cars, SUV's, LCV's and HCV's. It may sound unbelievable but is true that though functionally, it is nothing less than a highly sophisticated computer wheel alignment equipments, but it comes at almost ONE THIRD PRICE of these equipments and that too-with almost Zero Maintenance cost.

Some of the outstanding features of laser wheel alignment are:

• Accurate
• Fast & Easy alignment readings
• Reliable
• Pinpoint Laser Accuracy
• Easy to use
• Quick & accurate calibration
• Durable
• Simple & Sturdy

Laser wheel alignment comes with a specially designed software which enables the user to keep records for vehicle aligned, customer details. In addition to this, its powerful query engine helps user to generate various kinds of reports using simple function keys like customer name, model & periodical. Some of the special features of the software available for laser wheel alignment are:

• Runtime modification of customers, vehicle & models without going back to previous menu.
• Microsoft jet OLEDB 4.0" database to maintain unlimited records of vehicle data & alignment.
• Single form alignment for hassle free operation of software.
• Specification chart illustration for user friendly alignment.
• Easy to use software designed in visual basic 6.0 platform.
• Printing of specifications, Pre-Alignment & Post-Alignment values of vehicle.
• Additional information of odometer, Tyre conditions and remarks can be added.
• No need for a dedicated computer. It can be installed in any PC used in automobile workshop.

• 1.LA-30 (Front wheel alignment system for cars & SUV's)
• 1.LA-35 (Four Wheel alignment system for Cars & SUV's)
• 1.LA-30C (Front Wheel alignment system for Cars, SUV's & HCV's)
• 1.LA-35C (Four wheel alignment system for Cars, SUV's & HCV's)

All these models are also available in portable models specially designed for customer having less space for wheel alignment. These models are LA-30P, LA-35P, LA-30PC & LA-35PC

Auto-Serv presents (CAMIA 350) high precision and Wireless (Bluetooth) Computerized Wheel Alignment System

• Windows XP operating system.
• Vehicle specification : 30years
• Customer management system.
• Multi-Language support
• Vehicle specification write program.
• Voice announcement.
• Human-based design , easy & simple to handle.
• Integrated HELP system.
• 3-D animations.
• Custom database Back-up.
• Multiple Printer format.
• Multiple Printer format.
• E-Z Toe.
• Total Jack-up (2-post lift usealbe)
• Chamber jack-up
• Frozen Caster & SAL
• Shim Function

• Measurement : 8 Sensor type
• Sensor : Gravity & PSD Sensor with Height Quality Analysis
• Communication : Wireless (Bluetooth-RF Type)
• Power Supply :220V Single Phase 60hz 400W
• Measuring Head Power Supply :6V/3V
• Battery Life after recharging : Minimum of six hours in case of wireless type
• Measurement Analysis :
• Toe : 0.1mnn
• Camber : 0.01"
• Caster : 0.01"
• Max. Caster swing :
• Toe-in / Toe-out angle : 18"
• Measurement Range :
• Partial Toe : ±3"
• Overall Toe : ±6"
• Camber : ±15"
• Caster : ±30"
• King Pin : ±30"
• Thrust Set-Back Angle : ±3"
• Wheel Size Range : 12"~17"
• Wheel Size Range (Optional) : 12"~21"

Auto-Serv presents (S-350), high precision and Wireless (Radio Technology) Computerized Wheel Alignment System.

• Latest version of Zigbee wireless communication system.
• Steering lock, brake lock, 2 turn tables.
• 3600 line CCD aligner and 8 beam infrared optical sensors (High Precision).
• High accuracy inclinometer from VIT of Finland.
• Castor measurement directly and no turn-table reading need.
• Sensors can be exchanged by any others with recalibration within 3-5 years.
• Electronic-level display.
• The sensors can work continuously for nearly 18 hours with the 1800mA batteries and recharged for 1000 times.
• Ten thousands types of vehicle data with year 2010 data car.
• Diverse languages with English, Spanish, Korea, German, Russia and so on.
• Linux, Winxp or Vista operating systems supported.

• Comes with Four Sensors, Four Clamps, One Charger, One Communication Box, One Cabinet and Four Batteries.

• Measurement : Sensor Type
• Sensor : Sensor 3600 CCD
• Communication : Wireless (Radio Technology)
• Measuring Accuracy :
• Toe Angle : ±0.03°
• Single Toe Angle :±0.01°
• Camber Angle : ±0.02°
• Thrust Angle Setback : ±0.02°
• Kingpin Caster Angle : ±0.05°
• KPI Angle : ±0.05°
• Steering Angle : ±0.10°
• Measuring Range :
• Toe Angle : ±0.20°
• Single Toe Angle : ±0.10°
• Camber Angle : ±0.15°
• Thrust Angle Setback : ±0.9°
• Kingpin Caster Angle : ±18°
• KPI Angle : ±18°
• Steering Angle : ±24°
• Wheel Size Range : 11"~21"

Auto-Serv presents (ESCORT 7000), high precision and wireless (Bluetooth) Computerized wheel alignment system

• Windows XP operating system.
• Vehicle specification – 30years
• Customer management system.
• Multi-Language support.
• Vehicle specification write program.
• Voke announcement.
• Human based design, easy & simple to handle.
• Integrated HELP system.
• 3-D animation.
• Custom databases Back-Up.
• Multiple Printer format.
• Multiple unit of measure.
• E-Z Toe.
• Total Jack-up (2-post lift useable)
• Camber Jack-up.
• Frozen Caster & SAI.
• Shim Function.

• Fully aluminium Body-Light in Weight-RUST FREE.
• Special Sensors with LCD Display available in all four sensors.

• Measurement : 8 Sensor type
• Sensor : Gravity & PSD Sensor with Height Quality Analysis
• Communication : Wireless (Bluetooth-RF Type)
• Power Supply : 220V Single Phase 60hz 400W
• Measuring Head Power Supply : 6V/3V
• Battery Life after recharging :Minimum of six hours in case of wireless type
• Measurement Analysis :
• Toe : 0.1mnn
• Camber : 0.01"
• Caster : 0.01"
• Max. Caster swing :
• Toe-in / Toe-out angle : 18"
• Measurement Range :
• Partial Toe : ±3"
• Overall Toe : ±6"
• Camber : ±15"
• Caster : ±30"
• King Pin : ±30"
• Thrust Set-Back Angle : ±3"
• Wheel Size Range : 12"~17"
• Wheel Size Range (Optional) : 12"~21"

Auto-Serv presents the 2400 computerized wheel balancing system. Built as ruggedly as larger balancer, it can provide consistent output in high volume service environments. Ideal for tight shop spaces. Its packed with state of the art hardware and self diagnostic features.

The outstanding features of Auto-Serv 2400

• Push button self calibration
• Push button start
• Quick chucking nut
• Fail-safe autotension drive
• Vibration isolation system.

• Display :20mm high LED's
• Cycle Time : Approx. 6.9secs
• Balance Type : Dynamic/Static/Alloy Wheels
• Readings : Grams
• Rim Dia : 12" to 18"
• Tyre Capacity : Accommodates all passenger cars and SUV's
• Power : 220V, Single Phase, 50Hz, 5Amp

Auto-Serv presents Heavy Duty wheel balancing equipment which is the most reliable & accurate machine for balancing of heavy vehicle which includes trucks & buses.

• Self-Calibration and Diagnose
• Data input manually
• Ounces/Gram Selectable
• MM/INCH Selectable
• Pneumatic Wheel Lift Included

• Cones-5Pcs
• Rim width gauge-1Pc
• Wheel weight pier-1Pc
• 100gm calibration weight-1Pc
• Speed Nut-1Set
• Allen Wrench
• Wheel Hood
• Pneumatic Wheel Lift

• Rim Sizes :12"-24"
• Rim Width : 3"-20"
• Balancing Speed : 210rpm
• Accuracy : 1gm for car tyre 25gm for truck tyre
• Max. Wheel Diameter : 1280mm
• Power Supply : 380V/50Hz, 3ph
• Shipping Weight : 385kg

Auto-Serv presents the AS-2400A computerized wheel balancing system. This is an upgraded version of our previous model AS-2400 with better accuracy, better mechanism & low maintenance cost. Built as reggedly as larger balancer, it can provide consistent output in high volume service environments. Ideal for tyre shop spaces. It's packed with state of the art hardware & self diagnostic features.

• Push button self calibration.
• Push-button start.
• Quick chucking nut.
• Fail-Safe auto-tension drive.
• Vibration isolation system.

• Display :20mm high LEDs
• Cycle Time : Approx 6.9secs
• Balance Type : Dynamic/Static/Alloy Wheels
• Readings : Grams
• Rim Dia : 12 into 18in
• Tyre Capacity : Accommodates all passenger Cars & SUVs
• Power : 220V, Single Phase, 50Hz, 5Amp

The Video graphic Wheel Balancer with 14 colour monitor display is designed to balance wheels statically & dynamically with a minimum cycle time. The machine gives simultaneous indication for both inner & outer rim on video display. The machine can balance the wheels weighing upto 65 kgs. All the various commands & displays are situated on front panel. With the A.60's push button operated calibration, it is possible to obtain sufficient regulation range, suitable also for less common kinds of wheels (motorcycle & competition cars). The sophisticated design of the machine makes operations such as setting of the wheel dimensions, wheel mounting & machine operation very simple.

• 14" high resolution Color Video Graphic display with TV function
• Possibility of writing ones own name or a message on the initial screen
• Possibility of varying the tolerance function from 1 to 10 grams
• Possibility of unbalance display in 1 gram to 5 grams
• Measurement for 2 planes as well as 1 plane is possible
• Balancing Accuracy; 1 gm.
• Data Entry: Keyboard
• Static Optimization Programme
• 4 Alloy Rim Programme: ALU1, A1U2, ALU3, ALU4
• Self Calibration
• Operational Error Code display
• Single Phase low spin motor: 200 RPM
• Heavy Duty Shaft
• Automatic Stop Mechanism after measurement cycle: Electronic DC injection braking

Auto Serv Electro-Pneumatic tyre changer is made of Toughest and robust steel body. This tyre changer ensure easy fitting and removal of tyre within very short time without any hassle. The powerful bead-breaker is operated by a double action cylinder (186mm) with drawn hightensile alloy steel barrel designed to last for a long time even under unfavourable condition such as humidity/poor lubrications etc. As soon as a wheel has been placed between the rubber support bracket and the bead breaking plate, the pneumatic arm can be actuated by means of paddle. The arm exerts a break force of 16kn at 12bar which helps in relieving even the difficult to shift type bead from the rim without any risk of damage.

• External Rim Clamping : 10" to 18"
• Internal Rim Clamping : 10" to 20"
• Wheel Rim Width : 10"
• Max. Wheel Dia : 40" (1010mm)
• Compressed Air Required : 6 to 12Bars
• Motor : 0.75kw/1HP/3phase/412V or 0.75kw/1HP/1Phase/230V
• Bead Breaking Pressure : 16.5kn at 12Bar

(For Car & Motorcycle)
Auto Serv (AS-500) Tyre changer is made of Toughest auto Robust steel body. This tyre changer ensures easy fittings and removal of tyre within very short time without any hassle.

• The jaw claw and sliding block adopts cast steel material. Wear proof and no deformation is achieved.
• The sliding claw block make have wider worker scope for the rim of automobile and motorcycle from 9" to 22".
• It could handle the motorcycle wheel with the wheel axle and brake block the wheel.
• Quilted clamp over and plastic insert for mount/demount head protect the rim from scratching.
• By adjusting micro manipulator control knob, the perfect control between the rim and the duckhead is rached and avoid the damage to rim.

• Power Voltage : 220V/380V
• Working Air Pressure : 0.8-1.0MPa
• Rate : 1.1~0.75kw
• Max Wheel Diameter : 38"
• Average Rotate Speed : 6.8rpm
• Shoval Force : 2000kg
• Net Weight (Approx) : 185kg
• Packing Dimension : 980 x 880 x 960mm

• Rim Diamter : Inner 12"~22"
  Outer 9"~20"
• Rim Width : 3"~12"

• Rim Diamter : Inner 12"~22"
  Outer 9"~20"
• Rim Width : 3"~12"

Auto-Serv's DL-1500 "Large" version changer may mount and demount all kind of large buses with different model of tyres. It is also applied to tyres with split ring, radialply tubeless (without inner tube) and other agricultural and engineering tyres.

• Apply to the rim dimension between 14"-26"
• Lifting arm and universal chuck are all driven by the hydraulic pressure.
• Locking jaws with different gripping possibilities.
• Movable low-voltage control unit.
• Operating Voltage 24V, Safety and stable.

• Rim Diameter : 14"-26"
• Max. Wheel Weight : 500kg
• Max wheel width : 780mm
• Max tyre diameter : 1600mm
• Hydraulic Pump Motor : 1.5kw 380V-3PH
• Gear box motor : 1.5kw, 380V-3PH
• Operating Pressure : 0-130bar
• Bead Breaker Force : 1500kg
• Operation control voltage : 24V
• Net Weight (Approx) : 518kg
• Overall Dimensions (Approx) : 2500x2000mm

Auto-Serv's presents Heavy Duty Truck Tyre Changer (Model: AS-Boxer) for mounting and demounting of Trucks & Buses Tyre.

• Capable of Handling Wheel Diameter upto 1600mm
• Designed for tubeless and tube type tyres.
• Remote control hydraulic clamping jaws.

• Power Supply : 220V/380V 50Hz
• Motor Power : 1.5KW
• Max. Tyre Diameter : 59"
• Rim Size : 14"-26"
• Max. Tyre Weight : 1300kg
• Max. Tyre Width : 27"
• Working Pressure : 130bar
• Noise Level : <70db
• Gear Box Motor Power : 2.2kw, 380V, 3Phase
• Hydraulic Pump Motor : 1.1kw, 380V, 3Phase

Auto-Serv presents universal Tyre Changer (Model : CM-27T) which is the most reliable & User friendly machine for Mounting/Demounting of Tyres for Heavy Vehicles Tyres.

• Universal machines for rim sizes 13" to 27" with two rotation speed of the self centering chuck.
• Easy to fit and remove all types of trucks tubeless and tubetype tyres on all types of single piece, two pieces or three pieces rim assembly without damaging the tyre bead.

• Special tyre leaver.
• Rim clamp for tubeless truck tyres.

• Pair of wheel clamp
• Set of 4 Jaws for alloy rims.
• Locking Extension
• Read guide lever.

• Handles Wheels from : 13" to 27"
• Max. Wheel Height :1500kgs
• Max. Wheel Width : 780mm
• Max. Wheel Diameter : 1600mm
• Hydraulic pump motor : 1.1kw 3ph/400V
• Operating pressure : 0-130bar
• Gear box motor : 1.3-1.8kw / 3ph/400V
• Bead breaking force : 1500kg
• Noise level : <70db
• Net weight : 530kg
• Machine dimensions : 1750x1740x1270(h) mm
• Packing dimensions : 150x160x104(h) cm

• Easy changeable five die set, movable on 150 steel balls
• Cater all sheet rim sizes between 4 inches to 6inches covering all passengers cars and SUV's
• Available in 3-phase & 1-phase motor option.
• Reverse/Forward motor speed in all phases.
• Rim center tool, with 4 ways directional mechanism.
• All rim size-mounting plate with even bolt space.
• Heavy duty wobbling rectification hydraulic jack.
• All dies out gearbox are made of heavy EN8 material for longer, trouble free operation.

• Height : : 1291.2mm
• Width : : 609.6mm
• Length : : 914.4mm
• Weight : : 350kgs
• Hydraulic Jack : : Hand Pump Type-Vertical
• Vertical Dies : : 5 (4",4.5",5.5" & 6")
• Drive Motor : : 2HP Single/Three Phase
• Power Source : : 440V AC or 220V AC

Auto-Serv presents Rim Straightener that allows easy repair of Damaged wheels, Heavy Duty, one man operation, Easy changeable 12 dyes set, Available in single & Three phase motor, Reverse, Forward motor speed in all phase, All rim size mounting plate.

• With double days at center removes bend accurately.
• Heavy damaged rims at corner can also be straitened accurately.
• Dye attachment for 4", 41/2", 5", 51/2", 6", 61/2" Rims.
• Power : 220V AC Single Phase
• Motor : 2hp 1440rpm
• Weight : Approx 300kg
• Tools have to be changed for different sizes.