Send Email
Samvit Garage Equipments Samvit Garage Equipments Samvit Garage Equipments
Samvit Garage Equipments
AC Service Equipment Diesel Smoke Meter
Manufacturer & Supplier of
Automobile Workshop
& Emission Control
Equipment
Automotive AC Service Equipment Tyre Changing Equipment
Fully Automatic Ac Gas Recycling Equipment
Samvit Garage Equipments
Pollution Checking Equipments
Tyre Shoppe Equipments
Automobile Workshop Equipments
Samvit Garage Equipments

Nitrogen Generator & Inflator

Auto-Serv presents purest, fastest & smallest Nitrogen Generator. N2 Buster nitrogen generator provides 92%-98% pure nitrogen to fill in tyre.
Features:
  • 92% to 98% pure nitrogen output.
  • Fitted with clip-on filling gun.
  • Instant nitrogen output, no waiting.
  • Analog filling gun provided with the machine.
  • Air IN pressure gauge.
  • N2 OUT pressure gauge.
  • Working range 20psi to 150psi.
  • Suitable for all types of vehicle, including passenger cars, SUV, LCV & HCV's.
  • Industrial grade and quality hoses and fittings.
  • Auto-shut off when not in use.
  • Smallest in size and fastest in filling.
  • Future upgradation option available.
Technical Specification :
  • Weight : 60kg
  • Height : 1220.0mm
  • Width : 305.0mm
  • Depth : 305.2mm
  • Timer : Automatic
  • Pressure Control : Automatic
  • Pressure Gauge : 0-150psi
  • Air Input : Min 60psi
  • N2 Output : 20% less then input
  • Switches : Rocker
  • Controls : Specific to operation
  • Power Source :220V AC
Benefits to vehicle
  • Fuel saving upto 10%
  • Smooth Handline.
  • Increased tyre life.
  • Less pressure lose.
  • Enhanced performance
  • Smoother, vibration free ride.
Nitrogen Generator & Inflator  Brake Cum Clutch Bleeder

Digital Air Inflator - Air Compressor


Videographic Wheel Balancer


Digital Air Inflator

HIGHLY ACCURATE MODEL NO 89 MDA
The Auto-Serv's 89MDA provides highly accurate, reliable tyre inflation for indoor and outdoor applications. It has an impact resistant polycarbonate enclosure & can be used for fixed or mobile operations.
Features:
  • Made from Impact Resistant Polycarbonate
  • Suitable for Fixed and Mobile Operations.
Technical Specification :
  • Housing
    • Material : High Impact Polycarbonate Alloy
    • Degree of Protection : IP66
    • Standard Reference : AS1939, IEC529
    • Dimensions : 220 220x 100mm
    • Weight : 235 kg (6lbs)
  • Ambient Conditions
    • Operating Temperature (Without Heater) : -0° to +60°C (32° to 140°F)
    • Storage Temperature : -40° to +70°C (-40° to +158°F)
    • Relative Humidity : 100%
  • Operating Voltage
    • Supply AC Voltage : 8-16V ac or 110-120V, 220-240V
    • Length o13 Core Flex : 1.8m
    • Supply DC Voltage : 11-18V dc
    • Length of 2 Core Flex : 3m
    • Current : 1A Max. Fuse Resettable, trip current 1.1A nominal
  • Operating Pressure
    • Maximum Inlet Air Supply Pressure : 150psi, 1035 kpa or 10.3 bar
    • Recommended Inlet Air Supply : Differential of 10psi, 70kpa or 0.7bar above the maximum set pressure
    • Maximum Operation Pressure : 145psi, 1000kpa or 10.0bar
    • Minimum Operation Pressure : 5psi, 35kpa or 0.3bar
    • Accuracy : ±0.3psi, 2kpa or 0.02bar
    • Unit Increments : 1psi, 5kpa, or 0.1bar
    • Units of Measurement : Psi, kpa, bar, kg/cm2 or atm
  • Inlet Hose
    • Material : PVC
    • Standard Reference : AS2554 Class B
    • Length : 1m
    • Internal Diameter : 6mm
    • External Diameter : 12mm
    • Pressure Rating : 230psi, 1586 kpa or 15.8 bar
    • Optional : MS Cabinet
Digital Air Inflator - Air Compressor

Digital Air Inflator - Air Compressor




Air Compressor with Two Stage Compressor

Auto Serv's presents Heavy Duty Air Compressor with Two Stage Compressor (Model : AS-5HP)
Features:
  • Inslach Compressor
  • Low Sound Noise
  • Auto-Cut Off
  • Pressure Switch Gauge
  • Inger Sol Rand Design Bore X Stroke (Inch) – 4" & 2.50" x 2.75"
Technical Specification :
  • Compressor
    • Cylinder Nos. : 2
    • Max Pressure (Psig) : 175kg/km2 12.30
    • Piston Displacement (CFM) : 17.30
    • Sound Limit : 70DB
  • Tank
    • Tank Sheet : MS Gauge 5mm
    • Side Discs : MS Gauge 6mm
    • Capacity : 200Ltrs
  • Motor
    • Power : 5HP / 3.7KW / 3Phase
    • Make : Crompton or Any other equivalent Branded Motor
  • Starter
    • Make : TC/Benton/L&T;
    • Auto-Cut Off / Pressure Gauge : Alfa India
Digital Air Inflator - Air Compressor

Digital Air Inflator - Air Compressor




Multi Car Scanner

  • The most powerful diagnostic car scan tool in the world.
  • Covers more vehicles & Wider Range of systems including all major American, European & Asian models.
  • 32 bit Linux System with 24 column thermal printer along with touch screen.
  • Display Data Streaming in wave form.
  • Covers all Indian & Imported vehicles available on Indian roads.
  • Complete after sales service available all over India
  • Reliable Hardware proven platform, software & technology, over 80,000 X-431 units sold world wide.
  • Also available in Blue-Tooth & Color Display Models.
  • Upgradatton via Internet free of cost for 1 year. No compulsion on software upgradation after I year.
  • Covers functions like reading OTC, erasing DTC, reading live data, actuation test, cruise control, adaptation, im-mobilizer, Can Bus II Connector System (optional).
  • All the advantages of X-431
  • Covering heavy duty diesel and gas-fueled vehicle models of 12V & 24V voltage.
  • Compact design for convenient use
  • Color touch screen
  • High cost performance
Multi Car Scanner

Digital Air Inflator - Air Compressor

AUTO-SCANNER (WITHOUT PRINTER)

The Auto-Serv's JBT-CS 538C provides highly accurate, smaller size, lower price & reliable vehicle diagnostic tool for all Indian, European, Asian, American and Australian vehicles. It is very suitable for private workshops.

Features:
  • Small Size
  • TFTE (Thin Film Transistor Engine) Screen.
  • ACE (Acceleration Engine) for efficient analysis.
  • CSE (Communication Stability Engine) endures the pressure of high electric voltage.
  • Auto searching mode.
  • Can check and analyze petrol and diesel vehicle engine.
  • Current data live reading and diagnostic trouble code.
  • Covers Indian vehicles & other European & Asian Vehicles.
  • Advanced Built-in Software for analysis and data saving.
  • Provision to up-grade software with new makes and models.
  • Update via USB port.
  • Ignition timing advance.
  • Radiator Fan.
  • Connector Location.
  • Flight record.
  • Easy Key Pad operation.
  • Desired idle speed.
  • Electric load.
  • Graphic Function.
  • Error Message.
  • Battery Voltage.
  • Coolant temperature.
Technical Specification:
  • System Configuration : OBD I; OBD-II (ISO 9141-2, ISO-14230, SAE J1850, KWP2000, CAN Bus communication. 256MB in built memory.
  • Display : LCD backlit 320x240 resolutions.
  • Power : Cigar Lighter, Power Cable, AC/DC Adapter.
  • Engine Parameters : Engine Speed, T P Sensor Volt, Barometric Pressure, O2 sensor,Total FT, Fuel Pump, A/c Cont. fan, IAC Flow duty, throttle position, fuel system, short fuel trim, fuel cut, A/c switch, Closed TP switch, Intake Air Temp, MAP Sensor, Injector Pulse width, Long Fuel Trim, Evap. Purge Valve, A/c Mag Clutch, Stop Light Switch.
AUTO-SCANNER (WITHOUT PRINTER)

Digital Air Inflator - Air Compressor

Auto-Scanner (Without Built-In Printer)

The Auto-Serv's JBT-CS 538D provides highly accurate, smaller size, lower price & reliable vehicle diagnostic tool for all Indian, European, Asian, American and Australian vehicles. It is very suitable for private workshops.

Features:
  • Small Size
  • TFTE (Thin Film Transistor Engine) Screen.
  • ACE (Acceleration Engine) for efficient analysis.
  • CSE (Communication Stability Engine) endures the pressure of high electric voltage.
  • Auto searching mode.
  • Can check and analyze petrol and diesel vehicle engine.
  • Current data live reading and diagnostic trouble code.
  • Covers Indian vehicles & other European & Asian Vehicles.
  • Advanced Built-in Software for analysis and data saving.
  • Provision to up-grade software with new makes and models.
  • Update via USB port.
  • Ignition timing advance.
  • Radiator Fan.
  • Connector Location.
  • Flight record.
  • Easy Key Pad operation.
  • Desired idle speed.
  • Electric load.
  • Graphic Function.
  • Error Message.
  • Battery Voltage.
  • Coolant temperature.
Technical Specification:
  • System Configuration : OBD I; OBD-II (ISO 9141-2, ISO-14230, SAE J1850, KWP2000, CAN Bus communication. 256MB in built memory.
  • Display : LCD backlit 320x240 resolutions.
  • Power : Cigar Lighter, Power Cable, AC/DC Adapter.
  • Engine Parameters : Engine Speed, T P Sensor Volt, Barometric Pressure, O2 sensor,Total FT, Fuel Pump, A/c Cont. fan, IAC Flow duty, throttle position, fuel system, short fuel trim, fuel cut, A/c switch, Closed TP switch, Intake Air Temp, MAP Sensor, Injector Pulse width, Long Fuel Trim, Evap. Purge Valve, A/c Mag Clutch, Stop Light Switch.
Auto-Scanner (Without Built-In Printer)

Digital Air Inflator - Air Compressor




Hydraulic Two Post Lift

Auto-Serv's presents Two Post Electro-Hydraulic Lift (Model : FP-6253) which is the most reliable, user friendly maintenance free lift available in India.

Features:
  • Powder coated finish.
  • Locking Teeth in both columns.
  • Limitation Switch included.
  • Pull two sides of safety release cable to lower the vehicle.
  • Symmetric and Asymmetric arm configuration.
  • Dual Cylinder Structure.
  • Step-by-step instructions comes with each unit.
  • 24V voltage operation system.
Technical Data
  • Lifting Capacity (kg) : 3500
  • Lifting Height (mm) : 1800
  • Min. Height (mm) : 100
  • Overall Height (mm) : 2826
  • Inside Column (mm) : 2750
  • Lifting Time (sec) : 50
  • Motor Power : 2.2KW
  • Rated Oil Pressure : 18Mpa
  • Power Supply : 220V / 380V
  • Weight (kg) : 650
  • Truck Adapters : Included
Automotive Hydraulic Lift

Digital Air Inflator - Air Compressor


Double Cylinder Electro - Hydraulic

Auto-Serv presents Double Cylinder Electro-Hydraulic Two-Post Lift (TPL-800 BP). It possesses the characteristics of being simple & stable in operation. It's easy maintenance & convenient operation make it a wonder equipment for the automobile industries.

Features:
  • Double-Cylinder
  • Electro-Hydraulic
  • Oil Nylon Roller
  • Fall-Proof Safety Rack.
  • Locking Unit for corbel turning angle.
Technical Data
  • Lifting Capacity : 3.5ton
  • Lift Height : 1700mm
  • Rise Time : <50sec
  • Drop Time : 20sec
  • Motor Power : 2.2kw
  • Power Supply : 440v/220v
  • Rack Width : 3260mm
  • Rack Height : 2725mm
  • Pillers Distance : 2728mm
  • Net Weight : 550/600kg
Double Cylinder Electro - Hydraulic

Digital Air Inflator - Air Compressor




Head Beam Aligner

Features:
  • Power supply not required for Head Beam Alignment. Battery required only for use of Lux Meter.
  • Quick & simple to use.
  • Supplied with extra long Rails allowing unit to be wheeled away in drive. through application.
  • It takes very little space- Requires only 500mm between vehicle Head Lamp & Lens.
  • Supplied complete with installation instructions and operation Manual.
  • Clear & simple aiming screen.
  • Available in two models- with Lux Meter & without Lux Meter.
  • It is suitable for all types of Automobiles vehicles including Passenger Cars, SUV's, LCV's and Heavy Commercial Vehicles.
Technical Specifications:
  • Column Height (Boom) : 1665 mm (from T•Base)
  • Lens Diameter : 160 mm
  • Dimension (for Cabinet) : 280mm (H) x 243mm (W) x 535mm (L)
  • Measuring Range :
    Max height (from Ground Level) : 1500mm
    Min height (from Ground Level) : 240mm
Additional Technical Specifications:
(Applicable for HBA with Lux Meter):
  • Lux Meter : Digital
  • Indication Available : Lux Values
  • Lux Meter Range : 1 Lux to 50,000 Lux
  • Lux Digital Meter : 3 ½ Digits
  • Power Supply : 9V (6F22) Battery Digital Type
  • Accuracy : + 10 Lux
Head Beam Aligner

Digital Air Inflator - Air Compressor





Fuel Injector Cleaner


  • Tests available-Leak Test, Flow Tests, Pulse Flow, Open Flow & Equalization test
  • Only machine with Back Light Systems for better visualization
  • Highly precise per hole spray pattern visibility
  • CNC made universal aluminum injector rail for rust free finish
  • It cleans all European and Japanese MPFI ( Top Fed ) system
  • Unique borosil glass made funnel with stop cock.
  • Spray quantity measurement from 0-25 ml.
  • Fluid pressure control regulator.
  • Max pressure 0 to 60 pounds for faster and efficient cleaning.
  • Easily chargeable filter outside the machine.
  • Timer: Automatic Digital
  • Switches: Digital keypad
Fuel Injector Cleaner

Digital Air Inflator - Air Compressor

Yes! I am interested



PRODUCT RANGE
Pollution Checking Equipments
Tyre Shoppe Equipments
Automobile Workshop Equipments

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name